Organisational Factors » LTA hazard analysis/job safety analysis

Less than adequate hazard analysis/job safety analysis

This graph shows the number of records with the specific Root Contributing Cause.

The graph has been filtered as follows:

  • ICAM category is restricted to Organisational Factors.
  • The ICAM factor is LTA hazard analysis/job safety analysis.

Click on an element in the graph or in the legend to view the document list.

You need to upgrade your Flash Player

LTA = 'Less than adequate'.

Root & Contributing Causes

LTA hazard identification 14
LTA work method 13
LTA risk assessment 9
LTA awareness 8
LTA isolation 8
LTA design 4
LTA equipment design 4
LTA maintenance 4
LTA inspection 3
LTA maintenance work method 3
LTA pressure control 3
LTA testing 3
LTA brake systems 2
LTA isolation procedure 2
LTA safety warnings 2
LTA use of restraining device 2
Failure under pressure 1
Interference with safety interlocks 1
LTA competency 1
LTA equipment 1
LTA ground conditions 1
LTA guarding 1
LTA Isolation hardware 1
LTA isolation of plant 1
LTA maintenance procedure 1
LTA park brake system and maintenance 1
LTA parkup 1
LTA protection 1
LTA Standard Work Procedures (SWP) 1
LTA vehicle proximity 1
Static electricity discharge 1

LTA = 'Less than adequate'.

Printed: 02 July, 2020.

Important Disclaimer

By printing material on this website including all information, text, recommendations, ISOLgate graphs, ISOLgate Checklists, graphics and images (the "material") you have agreed to the ISOLgate Disclaimer. The material may not be applicable for the specific situation at your site and are provided as guidance material only and must be verified using a site specific risk assessment. UQ/MIRMgate does not accept any responsibility for the effectiveness or validity of the recommendations or your reliance on them. The material may not be distributed to other parties without the written permission of The University of Queensland.

©2020 ISOLgate